D4 HP Dimmer
The D4 HP Dimmer combines all of the functionality of our D4 Dimmer with higher output power and an integral 40A power supply in one unit. Designed for surface mounting to scenery, the angled control surface is both visible and accessible in tight spaces and corners. This workhorse is the perfect self-contained unit for the heavy demands of theatrical and touring events.
The D4 HP Dimmer is compatible with both DMX512 and 0-10VDC analog architectural style control. Both RJ45 and 5PXLR connectors are standard for DMX connection. Other features include Four dimming modes: Linear and ISL for incandescent use, Non-Dim (on/off) -for relays, solenoids, etc., and LED. It also provides four variable smoothing rates and five TV/Film modes for ultra-smooth low end dimming and flicker-free performance with LED tape.
110-240VAC input. 10A max output per channel, 40A max output per device.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D4 HP Dimmer Features
Four dimmer output channels
Each channel individually protected against over-current
Each channel individually protected against over-temperature
Dimmer resolution 16-bit
Dimming curves
Linear
ISL
Non-Dom
LED
LED Modes
TV/Film 1
TV/Film 2
TV/Film 3
TV/Film 4
TV/Film 5 (via RDM only)
LED Smoothing Modes (Four Settings)
Individual DMX addresses
Fully RDM enabled
Electronic / Functional Features
Individual bump buttons
BCD DMX Addressing (9POS)
Dip Switch, Curve Selection (4POS)
Dip Switch, LED Curve Selection
LED indicators
Dimming Channels
Data (data present)
Status
Connections
Neutrik PowerCON connector for the main power cord
DMX Input/Output via 5PXLR and RJ45
0-10VDC Architectural Style Analog via 5P screw terminal
Dimming Channels 2P screw terminals (2 x ea) - (Optional 30A Anderson Power Pole Connectors)
Mechanical
NEMA 1 Aluminum enclosure
Compliance
RoHS Compliant
The D4 HP Dimmer combines all of the functionality of our D4 Dimmer with higher output power and an integral 40A power supply in one unit. Designed for surface mounting to scenery, the angled control surface is both visible and accessible in tight spaces and corners. This workhorse is the perfect self-contained unit for the heavy demands of theatrical and touring events.
The D4 HP Dimmer is compatible with both DMX512 and 0-10VDC analog architectural style control. Both RJ45 and 5PXLR connectors are standard for DMX connection. Other features include Four dimming modes: Linear and ISL for incandescent use, Non-Dim (on/off) -for relays, solenoids, etc., and LED. It also provides four variable smoothing rates and five TV/Film modes for ultra-smooth low end dimming and flicker-free performance with LED tape.
110-240VAC input. 10A max output per channel, 40A max output per device.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D4 HP Dimmer Features
Four dimmer output channels
Each channel individually protected against over-current
Each channel individually protected against over-temperature
Dimmer resolution 16-bit
Dimming curves
Linear
ISL
Non-Dom
LED
LED Modes
TV/Film 1
TV/Film 2
TV/Film 3
TV/Film 4
TV/Film 5 (via RDM only)
LED Smoothing Modes (Four Settings)
Individual DMX addresses
Fully RDM enabled
Electronic / Functional Features
Individual bump buttons
BCD DMX Addressing (9POS)
Dip Switch, Curve Selection (4POS)
Dip Switch, LED Curve Selection
LED indicators
Dimming Channels
Data (data present)
Status
Connections
Neutrik PowerCON connector for the main power cord
DMX Input/Output via 5PXLR and RJ45
0-10VDC Architectural Style Analog via 5P screw terminal
Dimming Channels 2P screw terminals (2 x ea) - (Optional 30A Anderson Power Pole Connectors)
Mechanical
NEMA 1 Aluminum enclosure
Compliance
RoHS Compliant
The D4 HP Dimmer combines all of the functionality of our D4 Dimmer with higher output power and an integral 40A power supply in one unit. Designed for surface mounting to scenery, the angled control surface is both visible and accessible in tight spaces and corners. This workhorse is the perfect self-contained unit for the heavy demands of theatrical and touring events.
The D4 HP Dimmer is compatible with both DMX512 and 0-10VDC analog architectural style control. Both RJ45 and 5PXLR connectors are standard for DMX connection. Other features include Four dimming modes: Linear and ISL for incandescent use, Non-Dim (on/off) -for relays, solenoids, etc., and LED. It also provides four variable smoothing rates and five TV/Film modes for ultra-smooth low end dimming and flicker-free performance with LED tape.
110-240VAC input. 10A max output per channel, 40A max output per device.
City Theatrical uses 30A Anderson Power Pole connectors to connect loads to our low voltage dimmers. These connectors require a special crimping tool.
D4 HP Dimmer Features
Four dimmer output channels
Each channel individually protected against over-current
Each channel individually protected against over-temperature
Dimmer resolution 16-bit
Dimming curves
Linear
ISL
Non-Dom
LED
LED Modes
TV/Film 1
TV/Film 2
TV/Film 3
TV/Film 4
TV/Film 5 (via RDM only)
LED Smoothing Modes (Four Settings)
Individual DMX addresses
Fully RDM enabled
Electronic / Functional Features
Individual bump buttons
BCD DMX Addressing (9POS)
Dip Switch, Curve Selection (4POS)
Dip Switch, LED Curve Selection
LED indicators
Dimming Channels
Data (data present)
Status
Connections
Neutrik PowerCON connector for the main power cord
DMX Input/Output via 5PXLR and RJ45
0-10VDC Architectural Style Analog via 5P screw terminal
Dimming Channels 2P screw terminals (2 x ea) - (Optional 30A Anderson Power Pole Connectors)
Mechanical
NEMA 1 Aluminum enclosure
Compliance
RoHS Compliant